Flourite® Red is a specially fracted stable porous clay gravel for the natural planted aquarium. Its appearance is best suited to planted aquaria, but may be used in any freshwater aquarium environment. Flourite® Red is most effective when used alone as an integral substrate bed, but it may be mixed with other gravels. Gravel modifiers such as laterite are not necessary. Flourite® Red is not chemically coated or treated and will not alter the pH of the water. Flourite® Red is good for the life of the aquarium and need not be replaced.
To determine the number of bags required for your aquarium, please note that each bag (7 kg, 15.4 lbs) occupies a volume of approximately 7,000 cm3 (425 cu. in.). To determine your desired volume multiply tank width by length by desired depth. This bag is sufficient for about a 5 cm (2 inch) deep bed in a typical 40 L (10 gallon) tank.
Premium natural gravel for the planted aquarium
Good for the life of the aquarium
Rinse right in the bag (3.5 kg only)
Although it is pre-washed, because Flourite® Red is a natural product, it may become dusty in transit and require rinsing before use to remove any residual dust.
NOTE: The specialized mesh bottom of the 3.5 kg size allows it to be rinsed right in the bag.
TIPS: When adding water to aquarium, fill slowly to avoid disturbing Flourite® Red substrate bed. Place a bowl in the aquarium and add water directly to the bowl, allowing water to overflow softly on to the gravel bed. Initial cloudiness is normal. To remove cloudiness, use mechanical filtration (such as filter floss). Clarity™clearing. For an even stronger root zone and enhanced growth rates, add a 2.5 cm (1 inch) base layer of Onyx Sand™ to your aquarium before adding Flourite® Red.
Units=mg/kg, source: Plasma Emission Spectrometer, EPA Method 6010, Univ. of Georgia Chemical Analysis Lab